PX-L140 Pressure Exchanger
Energy Recovery · L Series · Low-Pressure High-Flow Energy Recovery Device
| Performance | |
| Maximum HP Inlet Flow | 140 gpm (31.8 m³/h) |
| Maximum LP Outlet Flow | 140 gpm (31.8 m³/h) |
| Maximum Inlet High Pressure | 450 psi (31 bar) |
| Maximum Inlet Low Pressure | 150 psi (10.3 bar) |
| Minimum Discharge Pressure | 7 psi (0.5 bar) |
| Peak Energy Transfer Efficiency | 97%+ |
| Service | Brackish Water / Low-Pressure RO |
| Design & Construction | |
| Operating Principle | Positive Displacement Isobaric |
| Series | L (Low Pressure, High Flow) |
| Housing Material | Fiberglass Reinforced Polymer (GRP) |
| Internal Components | CN3MN / 254 SMO |
| End Ports | AL-6XN Investment Cast |
| LP Interconnector | Titanium / AL-6XN / Super Duplex |
| O-Rings / Seals | EPDM |
| Fasteners | 316 SS |
| Piping Connections | |
| Port Size | 3" (DN 80) |
| Connection Type | 3" Grooved-end Flexible Pipe Coupling |
| Filtration Requirement | 20 µm nominal |
| Operating Conditions | |
| Operating Temperature | 33-120°F (0.6-49°C) |
| Medium | Brackish water / Industrial process water |
| Dry Weight | 55 lbs (25 kg) |
Large-Scale BWROIndustrial ROWater ReuseMunicipal Brackish Desal
Engineering Note: The PX-L140 combines the L-series high-flow capacity (140 gpm (31.8 m³/h)) with low-pressure optimization up to 450 psi (31 bar). Ideal for large brackish water desalination trains, municipal water reuse, and industrial process water applications where energy recovery at lower operating pressures is required.
Need sizing assistance? Contact our engineering team for system design and quotation.
