PX-70SB Low-Pressure Exchanger
Energy Recovery · SB Series · Brackish Water Energy Recovery Device
| Performance | |
| Maximum HP Inlet Flow | 70 gpm (15.9 m³/h) |
| Maximum LP Outlet Flow | 70 gpm (15.9 m³/h) |
| Maximum Inlet High Pressure | 450 psi (31 bar) |
| Maximum Inlet Low Pressure | 150 psi (10.3 bar) |
| Minimum Discharge Pressure | 7 psi (0.5 bar) |
| Peak Energy Transfer Efficiency | 97%+ |
| Service | Brackish Water RO / Low-Pressure Applications |
| Design & Construction | |
| Operating Principle | Positive Displacement Isobaric |
| Series | SB (Low Pressure) |
| Housing Material | Fiberglass Reinforced Polymer (GRP) |
| Internal Components | 254 SMO / CN3MN |
| End Ports | AL-6XN Investment Cast |
| LP Interconnector | Titanium / AL-6XN / Super Duplex |
| O-Rings / Seals | EPDM |
| Fasteners | 316 SS |
| Piping Connections | |
| Port Size | 1-1/2" (DN 40) |
| Connection Type | 1-1/2" Grooved-end Flexible Pipe Coupling |
| Filtration Requirement | 20 µm nominal |
| Operating Conditions | |
| Operating Temperature | 33-120°F (0.6-49°C) |
| Medium | Brackish water / Low-salinity feed |
| Dry Weight | 18 lbs (8 kg) |
Brackish Water ROLow-Pressure DesalIndustrial Water ReuseAgricultural RO
Engineering Note: The PX-70SB is designed specifically for low-pressure desalination applications including brackish water RO, water reuse, and industrial process water. With a maximum operating pressure of 450 psi (31 bar), it provides the same isobaric energy recovery principle as the SWRO models but optimized for lower differential pressures typical in BWRO systems.
Need sizing assistance? Contact our engineering team for BWRO system design and quotation.
