HPXP-200x150x210 Circulation Pump
Energy Recovery · HPXP Series · Horizontal Centrifugal
| Pump Design | |
| Size Designation | 200 x 150 x 210 |
| Pump Type | Horizontal End-Suction Centrifugal |
| Suction Port | DN 200 (8") |
| Discharge Port | DN 150 (6") |
| Impeller Diameter | 210 mm |
| Maximum Working Pressure | 40 bar (580 psi) |
| Connection | DIN/ANSI Flanged |
| Wetted Materials | |
| Casing | SAF 2507 Super Duplex SS |
| Impeller | SAF 2507 Super Duplex SS |
| Shaft | SAF 2507 Super Duplex SS |
| Mechanical Seal | Mechanical Seal (SiC/SiC) |
| Bearings | Grease-lubricated antifriction |
| Motor & Operation | |
| Motor Protection | IP55 |
| Service | SWRO Circulation / Interstage Boost |
| Medium | Seawater / RO Concentrate |
| Operating Temperature | 33-104°F (0.6-40°C) |
SWRO CirculationInterstage BoostSeawater ProcessDesalination Plant
Engineering Note: The HPXP-200x150x210 is a horizontal end-suction centrifugal circulation pump with full Super Duplex (SAF 2507) wetted construction. Designed for seawater and RO concentrate circulation duties in SWRO desalination plants. SiC/SiC mechanical seal faces provide long seal life in abrasive seawater service. DIN/ANSI flanged connections for flexible installation.
Need sizing assistance? Contact our engineering team for pump curves and quotation.
